Introduction簡介:

    CI-910L is a liquid hot melt adhesive. When the materials are bonded, there will be the best adhesion strength,

    especially for PVC, PU, cloth, leather and the primer treated rubber or EVA.

    CI-910L 為液態熱熔膠接著劑， 材質一經貼合，會有最佳的接著強度，尤其針對PVC、PU、布類、真皮與經處理劑 ( Primer ) 處理過之橡膠或EVA。

Operating usage 使用方法:

    After one side coated by roller coating and dried, place on another substrate need to be bonded, hot press them together under the conditions: 120-150 ℃*10-20 sec.

   以滾輪單面塗佈並乾燥後，以約120-150 ×10-20秒熱壓貼合(溫度時間之條件可視需要自行增減)。

Characteristics 特性:

1. Wide range usage, can bond a variety of materials.
2. High solid content.
3. Well elastic response
4. 適用範圍廣，可貼合多種材質。
5. 固成份高。
6. 成膜後彈性回覆佳。