Products
Carbride Grinding Tools (OEM products)
Product Model: Tungsten Carbide Cutter

 

  1. APPLICATION:  CARBIDE CUTALL TOOLS ARE USED FOR ROUGHING THE SURFACES OF SHOE-MATERIALS BEFORE CEMENTING. ESPECIALLY FOR ROUGHING THE SURFACES OF RUBBER AND LEATHER.
     
  2. CHARACTERISTICS:    RE-CUTTING THE SURFACES OF MATERIALS AT HIGH SPEED (R.P.M.) BY THE BURRS ON THE TOOL WHICH ARE VERY SHARP AND RESISTANT TO HIGH TEMPERATURE. THAT WILL GAIN THE MOST EFFECTIVE ROUGHED SURFACES AND AVOID HAVING SMOOTH AND HIGH TEMPERATURE SURFACES AS  GROUND BY SAND PAPER, WHICH ARE POOR FOR CEMENTING. A BETTER BUFFED SURFACE MAKE A BETTER BONDING, ESPECIALLY THE OILY LEATHER USED FOR OUTDOOR SHOE.

     "SSG" is the original "toothy" coating, consisting of very sharp conical points randomly positioned on the wheel surface. Many customers find that the random positioning of SSG teeth prevents "tracking", assuring an excellent surface finish on critical products such as softgraphics-arts rollers and rollers for film or coating applications. The random tooth arrangement also makes SSG the best choice if you must grind soft materials at relatively low wheel speeds.



      3.ADVANTAGE:

     

CARBIDE CUTALL TOOL

SAND PAPER

A.   NO HIGH TEMP. OCCURRED

A. High temp. damage the rubber surface

B.   GOOD FOR CEMENT TO ANCHOR ON THE ROUGHED SURFACE

B. Smooth surface not good for cement to penetrate in

C.   DURABLE OVER 300 hrs

C. 2-3 hrs only

D.   EASY TO USE

D. made by hand in advance, waste man power

E.   INCREASE AVERAGE BONDING STRENGTH

E. Poor bonding control


4.  CAUTION:

(a). BE SURE TO WEAR APPROVED SAFETY DEVICES.

(b). ONLY WORKING AT HIGH SPEED ( R.P.M.)

(c). NO KNOCKING WITH METALS DIRECTLY.

(d). SPECIAL SPECIFICATION ORDER ACCEPTED AT MIN. ORDER.


 

ITEM NO.

APPEARANCE

DIAMETER

HEAD

LENGTH

SHAFT

DIAMETER

SHAFT

LENGTH

SSG

C-12A
no top coated

12 +mm
(15~17mm)

20mm

5.5mm

30mm

300

170

C-12
top coated

12+ mm
(15~17mm)

20mm

5.5mm

30mm

390

300

170

C-13
no top coated

12 +mm
(15mm)

13mm

5.5mm

30mm

300

C-34
top coated

20+ mm

27mm

6.0mm

27mm

300

LC-34
top coated

28+mm
(31mm)

29mm

6.0mm

30mm

300

LT-16

4~9 mm

31mm

6.0mm

20mm

300

LLT-16

4~9 mm

52mm

6.0mm

25mm

300

T-12

12.7mm

22mm

6.0mm

30mm

300

BN-34

20+ mm
(21.5mm)

28mm

6.0mm

30mm

170

C-14E
top coated

6.35+ mm
(8mm)

12.7+mm
(13.5mm)

3mm

26mm

230

C-18E
top coated

3 +mm
(5.4mm)

20m

3mm

20mm

230

T-14E

6.35 mm

12.7mm

3mm

25mm

230

T-18E

2~5 mm

23mm

3mm

20mm

230