|
Products
Hot Melt Adhesive Film (no sew adhesive film) Specification
APPEARANCE
Item |
Hardness
(ASTM2240) |
Appearance |
(RDA-II)Fluid Temperature |
100% Modulus
(kgf/cm2) |
Tensile Strength
CNS13336 (kgf/cm2) |
Recommended
Operation Condition |
Specialized Properties |
CH-422H |
82±3A |
Transparent |
133℃±5℃ |
68±5 |
300 |
150℃_9.8kgf/cm2_20sec |
Use on PET, Heat Resistant, |
CH-815 |
90±3A |
Translucent |
100℃±5℃ |
38±5 |
600 |
120℃_9.8kgf/cm2_15sec |
Moderate Hardness, It can be used for Protective gear |
CH-817 |
73±3A |
Transparent |
90℃±5℃ |
35±5 |
350 |
120℃_9.8kgf/cm2_20sec |
Hard, Apply able to PC, ABS, Mobil phone case |
CH-822 |
62±3A |
Transparent |
105℃±5℃ |
15±5 |
150 |
130℃_9.8kgf/cm2_30sec |
soft, good flexible response and good heat resistance, textile, Vamp |
CH-824 |
78±3A |
Transparent |
110℃±5℃ |
27±5 |
350 |
130℃_9.8kgf/cm2_15sec |
Soft, Good Elastic Response, Operating at Low Temperature. textile, Vamp |
CH-826 |
76±3A |
Transparent |
115℃±5℃ |
26±5 |
300 |
150℃_9.8kgf/cm2_15sec |
Soft, Good Elastic Response, Heat Resistant, Vamp, Mobil phone shell |
CH-827 |
82±3A |
Transparent |
115℃±5℃ |
56±5 |
650 |
150℃_9.8kgf/cm2_15sec |
Soft, Good Elastic Response, Heat Resistant, Vamp, Mobil phone shell |
CH-829 |
78±3A |
Transparent |
98℃±5℃ |
27±5 |
200 |
130℃_9.8kgf/cm2_15sec |
Soft, Good Elastic Response, Operating at Low Temperature, Vamp |
CH-910 |
96±3A |
Translucent |
90℃±5℃ |
59±5 |
300 |
130℃_9.8kgf/cm2_15sec |
Hard, Apply able to PC, ABS, Mobil phone case |
EH-342 |
85±3A |
Transparent |
80℃±5℃ |
72±5 |
200 |
110℃_9.8kgf/cm2_15sec |
Good Bonding to Aluminum |
EH-933B |
81±3A |
Transparent |
135℃±5℃ |
33±5 |
400 |
150℃_9.8kgf/cm2_20sec |
It can be use on Cloth, Shoe Material ( RB bond with Phylon ) |
EH-935 |
91±3A |
Translucent |
113℃±5℃ |
- |
- |
120℃_9.8kgf/cm2_20sec |
Apply to Mold Sockliner ( EVA foam bond with Textile) |
EH-935F |
88±3A |
Translucent |
88℃±5℃ |
- |
- |
105℃_9.8kgf/cm2_20sec |
Apply to Mold Sockliner ( EVA foam bond with Textile ) |
EH-936 |
84±3A |
Transparent |
115℃±5℃ |
34±5 |
200 |
140℃_9.8kgf/cm2_15sec |
It can be use on Cloth, Shoe Material, Sockliner |
PH-924 |
57±3D |
Non-woven |
110℃±5℃ |
|
|
130℃_9.8kgf/cm2_20sec |
It can be use on Garments, vamps, lining |
PH-942 |
95±3A |
Translucent |
110℃±5℃ |
|
|
140℃_9.8kgf/cm2_15sec |
It can be use on Cloth, Logo, Velcro, Washable≦60℃, Dry-Clean, |
CH Series: Applicate to Cloth、Soft and Hard PVC、Wood、TPU Leather
EH Series: Applicate to Rubber、EVA Foam、Cloth
PH Series: Applicate to Nylon Series Products
With different material, the operating temperature, pressure, and time will be a little difference ,
adjusting by the condition is necessary.
Thickness :0.04mm, 0.08mm, 0.12mm, 0.16mm, 0.20mm....
Packing per roll :
Below 0.12mm,width 100cm or 137cm X length 100m ;
Above 0.16mm, width 100cm or 137cmX length 50m
|